Neptune Apex Trident Aquarium Analyzer

• Automated testing of alkalinity, calcium, and magnesium.
• Incredible precision.
• Easy, plug and play, 15-minute setup.
• Easy to read results and graphs.
• High/low alerts when tank is out of range.
• Controls dosing to maintain most consistent levels possible.
• One month's reagent supply stores neatly inside.
• Uses less than 7ml tank water per test.
• Incredibly quiet!

HOW IT WORKS

On a scheduled basis the Trident carefully mixes its reagents with a small amount of sample water from your aquarium. While doing this, it is measuring (titrating with a precision peristaltic pump) the amounts of each that are necessary to reach an expected colour change (determined by the electronic colorimeter). When it finishes the titration, it sends this sample/reagent fluid to your waste container. It then interprets the results of that test and logs the value into your Apex system.

EASY PLUG AND PLAY SET UP

From the box to testing in under 15 minutes! Unlike other testing systems, there are no reagents to mix, tubes to cut, or pumps or probes to calibrate. Simply plug in one cable, two tubes, and run the setup task on the Apex Fusion mobile app — it holds your hand through the installation with helpful videos along the way.

CONSISTENCY AND PRECISION, TEST AFTER TEST

The Trident tests with a precision of +/- 0.05 dKh for Alkalinity and 15ppm for Calcium and Magnesium. This is better than humans can do consistently with every hobby-grade test kit on the market.

OUT OF RANGE ACTIONS AND ALERTS

You can set up your Apex to alert you, or take immediate action(s) when a parameter falls outside of the safe zone you specify. As just one example, you might be dosing an Alkalinity solution and a misconfiguration could lead to overdosing of your tank. The Trident will catch that, alert you, and give you more time to make that correction before it’s too late and to save your aquarium. The data from the Trident can also be used to turn on and off other devices (like dosers or solenoids) to protect your tank even more.

SIMPLE, INFREQUENT REAGENT CHANGES

When using the default testing schedule of four (4) alkalinity, two (2) calcium, and two (2) magnesium tests a day, the reagent stored inside the Apex will last a full month. And adding new reagent is super simple — just slide out the drawer, remove the old bottle(s), and replace them with new ones. If you desire, you can also run a calibration with the included calibration standard.

What's Included?

• 1 x Trident System
• 1 x 1Link Cable
• 5ft Black Sample Tubing
• 5ft Clear Waste Tubing
• 1 x 2-Month Reagent Supply*

*The included reagent is the actual 2-month reagent kit, however with initial setup of the Trident, a small amount of reagent will be used, which will result in about 45 days of reagent remaining (which can vary depending on how many times a day you test).

Physical Dimensions:

10″(H) x 4.25″ (W) x 12” (D)